Loading...
Loading...
On an HPE ProLiant DL325 Gen12 or HPE ProLiant DL345 Gen12 server, when AC power is applied or upon a server aux power-cycle, HPE Integrated Lights-Out (iLO) may be rendered unreachable on the network if the iLO network is configured to Shared Network port over OCP NIC in OCP Slot B.
Any HPE ProLiant DL325 Gen12 or HPE ProLiant DL345 Gen12 system with HPE Integrated Lights-Out 7 (iLO 7).
A future firmware update will correct this issue and this advisory will be updated when the firmware is available.As a workaround until the firmware is available:Use an iLO Dedicated Network connection or an iLO Shared network connection over OCP "A" on these servers.iLO can be brought back on the network with a warm reset of iLO. Reset iLO using one of the following methods:If the host OS is accessible remotely:Access iLO GUI/iLORest/iLO CLI over SSH using iLO Virtual NIC IP address from the host OS to reset iLO.If physical access to the server is possible:Press the UID button for 5 to 9 seconds to initiate an iLO reset for servers with a UID button.ORThe iLO GUI or iLO CLI can be accessed over the iLO service port to reset iLOORThe Reset iLO option is also in System RBSU (F9 prompt).
Operating Systems Affected:OS Independent
Click on a version to see all relevant bugs
Hewlett Packard Enterprise Integration
Learn more about where this data comes from
Bug Scrub Advisor
Streamline upgrades with automated vendor bug scrubs
BugZero Enterprise
Wish you caught this bug sooner? Get proactive today.