Info
Document Version
Release Date
Details
2
02/24/2021
Updated the Resolution with the permanent fix, OneView 5.6 or later.
1
11/09/2020
Original Document Release.
When editing the server profile, it is not possible to set the "Uncore Frequency Limiting" BIOS/RBSU setting for HPE Gen9 servers because the option is missing from the Edit BIOS Settings page in HPE OneView.
Scope
Any HPE OneView version 5.5, or any earlier version that manages HPE Gen9 servers.
Resolution
This issue is addressed by upgrading to
HPE OneView 5.6 or later.
To work around the issue, manually change the BIOS setting on the server itself:
During POST, press F9 to boot into the System Utilities menu.
In the System Utilities menu, navigate to "System Configuration --> BIOS/Platform Configuration (RBSU) --> Advanced Options --> Uncore Frequency Limiting."
Select a setting.
Save the settings. Press "Enter" to save settings. Press F10 to save the change, then press "Y" when prompted to accept the change.
Press the "ESC" key repeatedly to navigate back to the top menu level. There are two options: Exit and Resume System Boot, or "Reboot the System."
Select "Reboot the System" and exit System Utilities, then press "Enter" when prompted to exit and reboot the server.
RECEIVE PROACTIVE UPDATES
: Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively in your e-mail through HPE Subscriber's Choice. Sign up for Subscriber's Choice at the following URL:
Proactive Updates Subscription Form.
NAVIGATION TIP:
For hints on navigating HPE.com to locate the latest drivers, patches and other support software downloads to ProLiant servers and options, refer to the
Navigation Tips document.
SEARCH TIP:
For hints on locating similar documents on HPE.com, refer to the
Search Tips document.
