Launching soon: The world's first vendor agnostic bug scrubLearn more & join waitlist
OPERATIONAL DEFECT DATABASE
...
...
Document Version Release Date Details 2 April 18, 2022 HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter (647594-B21) has been removed because it is not affected by this issue. A note has been added to the Description section. 1 March 14, 2022 Original Document Release. On HPE ProLiant servers configured with either of the HPE network adapters with firmware combo image v20.19.31 (or earlier) listed in the Scope section below; an incorrect link up reporting of unused ports of the network adapters may be experienced and logged in the Integrated Management Log (IML) when iLO is configured to use the Shared Network Port. This incorrect reporting of link up is the result of a race condition that is occurring with the management protocols requesting port status to the shared network port. The resulting condition incorrectly reports a link up status on an unused port. This also leads to a critical condition being reported in the Integrated Management Log (IML) as the port status is correctly reported as unlinked on the next polling cycle. In the example below, the server was configured with a network cable inserted into Port 1 of the HPE Ethernet 1Gb 4-port 331i Adapter while ports 2,3 and 4 had no cable connection, are in an expected link down state, and the iLO is configured to use the Shared Network Port: IML entries taken from the iLO Note: The HPE iLO shared network port configuration is limited to LOM or FlexLOM only; for more information, refer to the " iLO network port configuration options " section of the following document: HPE Integrated Lights-Out (iLO 5) for Gen10 Servers - Configuring iLO Network Settings
HPE ProLiant servers configured with either of the following HPE network adapters with firmware combo image v20.19.31 (or earlier) and with iLO configured to use the Shared Network Port: HPE Ethernet 1Gb 4-port 331i Adapter (LOM) HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter (629135-B21) Note: The network adapter(s) in this document are affected by a naming standard change for HPE products to help customers quickly and easily identify the specific vendor and model while configuring HPE platforms. For more information about the name changes and for identification purposes, refer to the following Customer Notice: HPE Network Adapters - Product Renaming Framework And Plan For HPE Network Adapters
To resolve this issue, download and install firmware combo image version 20.19.51 (or later), available at the following URLs: HPE Broadcom NX1 Online Firmware Upgrade Utility for Windows Server x64 Editions Version 5.2.6.0 HPE Broadcom NX1 Online Firmware Upgrade Utility for Linux x86_64 Version 2.29.0 HPE Broadcom NX1 Online Firmware Upgrade Utility for VMware Version 1.30.0 RECEIVE PROACTIVE UPDATES : Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively in your e-mail through HPE Support Alerts. Sign up for Support Alerts at the following URL: HPE Email Preference Center NAVIGATION TIP: For hints on navigating HPE.com to locate the latest drivers, patches and other support software downloads, refer to the Navigation Tips document. SEARCH TIP: For hints on locating similar documents on HPE.com, refer to the Search Tips document.