Loading...
Loading...
+ LACP port-priority will not take any affect: switch(config-if)# lacp port-priority 500 switch(config-if)# show lacp interface ethernet 1/1 Interface Ethernet1/1 is up Channel group is 1 port channel is Po1 PDUs sent: 28 PDUs rcvd: 7 Markers sent: 0 Markers rcvd: 0 Marker response sent: 0 Marker response rcvd: 0 Unknown packets rcvd: 0 Illegal packets rcvd: 0 Lag Id: [ [(8000, a4-4c-11-2c-dd-c1, 8000, 8000, 101), (8000, f4-cf-e2-8c-88-bc, 8000, 8000, 101)] ] Operational as aggregated link since Tue Aug 10 05:29:23 2021 Local Port: Eth1/1 MAC Address= f4-cf-e2-8c-88-bc System Identifier=0x8000, Port Identifier=0x8000,0x101 < —————— it should be 0x1f4,0x101 as 500 is 0x1f4 in hex
+ Platform which does not support DME
N/A
It seems to be not working on platforms with less than 4GB system memory as DME is not supported on those platforms. This means that this problem will affect majority of N3Ks.
Cisco Integration
Learn more about where this data comes from
Bug Scrub Advisor
Streamline upgrades with automated vendor bug scrubs
BugZero Enterprise
Wish you caught this bug sooner? Get proactive today.