Loading...
Loading...
C9600: Print a clear syslog message for FAN TRAY failure, message IDPROM read failure Prints one time syslog message on the console as below Switch#sh logg | i Fan *Mar 14 12:57:34.865: %CMRP-3-PFU_INITIALIZATION: R0/0: cmand: The RP has failed to initialize a Power Supply/Fan module controller because of FAULTY FANTRAY !!!
C9600: Print a clear syslog message for FAN TRAY failure, message IDPROM read failure Prints one time syslog message on the console as below Switch#sh logg | i Fan *Mar 14 12:57:34.865: %CMRP-3-PFU_INITIALIZATION: R0/0: cmand: The RP has failed to initialize a Power Supply/Fan module controller because of FAULTY FANTRAY !!!
C9600: Print a clear syslog message for FAN TRAY failure, message IDPROM read failure When there is failure on the Fan Tray on C9606R Chassis which can be confirmed using this show CLI Switch#show platform hardware authentication status Fan Tray Authentication: fail Line Card:1 Authentication: pass Line Card:2 Authentication: pass SUP0 Authentication: pass SUP1 Authentication: Not Available Line Card:5 Authentication: pass Line Card:6 Authentication: Not Available Can be confirmed using this show CLI as well Fan Fan States Tray Status 0 1 2 3 ------ ---------- ----------------------- FM2 N/A N/A N/A N/A N/A Switch# Prints one time syslog message on the console as below Switch#sh logg | i Fan *Mar 14 12:57:34.865: %CMRP-3-PFU_INITIALIZATION: R0/0: cmand: The RP has failed to initialize a Power Supply/Fan module controller because of FAULTY FANTRAY !!! Switch#
None
Customers should see clear syslog message on the console with regards to IDPROM read failure on the Fan Tray so that if need be customers can take clear action to replace the faulty FAN TRAY C9600: Print a clear syslog message for FAN TRAY failure, message IDPROM read failure When there is failure on the Fan Tray on C9606R Chassis which can be confirmed using this show CLI Switch#show platform hardware authentication status Fan Tray Authentication: fail Line Card:1 Authentication: pass Line Card:2 Authentication: pass SUP0 Authentication: pass SUP1 Authentication: Not Available Line Card:5 Authentication: pass Line Card:6 Authentication: Not Available Can be confirmed using this show CLI as well Fan Fan States Tray Status 0 1 2 3 ------ ---------- ----------------------- FM2 N/A N/A N/A N/A N/A Switch# Prints one time syslog message on the console as below Switch#sh logg | i Fan *Mar 14 12:57:34.865: %CMRP-3-PFU_INITIALIZATION: R0/0: cmand: The RP has failed to initialize a Power Supply/Fan module controller because of FAULTY FANTRAY !!! Switch#
Cisco Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.