Loading...
Loading...
Problem is only seen when enabling AppNav on a device the is already establish auto RP. In the case of an AppNav enabled device enabling auto RP afterwards this issue is not seen.
An overlapping address is used between features. This has been seen specifically with AppNav and PIM with auto RP but the problem may exist with other features. service-insertion service-context waas/1 enable Tunnel creation failed due to overlapping tunnel source IP 192.168.0.233 SVC_CTLR: Overlapping Tunnel source with tunnel Tunnel3. Failed to set source addr 192.168.0.233 %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel4, changed state to down show int description | i Pim Tu3 up up Pim Register Tunnel (Encap) for RP
Change source interface for PIM register to a tunnel interface. ip pim register-source If not able to use loopback for PIM register then the following will work as well, this will break multicast temporarily unless you have redundancy! Interface that is being used as the source for both features: interface gig0/0/0 no ip pim sparse-mode %PIM-5-NBRCHG: neighbor 192.168.0.235 DOWN on interface GigabitEthernet0/0/0 DR %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel3, changed state to down service-insertion service-context waas/1 enable %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel4, changed state to up interface gig 0/0/0 ip pim sparse-mode %PIM-5-NBRCHG: neighbor 192.168.0.235 UP on interface GigabitEthernet0/0/0 %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 192.168.0.235 on interface GigabitEthernet0/0/0 %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel3, changed state to up
After performing workaround, dynamic tunnels may switch their role after any sort of reload with the Appnav Auto-Tunnel being the first. However the issue itself is never seen again as the AppNav config creates the tunnel prior to any RP discovery can happen.
Click on a version to see all relevant bugs
Cisco Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.