Loading...
Loading...
missing information when SNMP querying the 9300 for 1.3.6.1.2.1.47.1.3.2.1 (entAliasMappingEntry) only one stack ( main ) shows up
SNMP server or application using SNMP to poll entAliasMappingEntry will only receive mappings for the primary switch in the stack.
Power cycle of the stack.
If you perform an SNMP walk of the object you will see ifIndex entries only for the active switch in the stack but not the members. C:\usr\bin>snmpwalk.exe -v2c -c test 10.207.172.70 1.3.6.1.2.1.47.1.3.2.1 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1062.0 = OID: IF-MIB::ifIndex.8 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1063.0 = OID: IF-MIB::ifIndex.9 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1064.0 = OID: IF-MIB::ifIndex.10 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1065.0 = OID: IF-MIB::ifIndex.11 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1066.0 = OID: IF-MIB::ifIndex.12 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1067.0 = OID: IF-MIB::ifIndex.13 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1068.0 = OID: IF-MIB::ifIndex.14 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1069.0 = OID: IF-MIB::ifIndex.15 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1070.0 = OID: IF-MIB::ifIndex.16 SNMPv2-SMI::mib-2.47.1.3.2.1.2.1071.0 = OID: IF-MIB::ifIndex.17 Following command can be run to confirm which indexes map to which port. show snmp mib ifmib ifindex
Cisco Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.