Loading...
Loading...
Cat9400 - interface template configuration changes when interface is shutdown: Before shutting, the derived configuration looks as follows : interface GigabitEthernet x/x/x switchport trunk native vlan 2700 ------> Config, which will change upon shutting the interface switchport mode trunk ------> Config, which will change upon shutting the interface switchport voice vlan 100 After shut, it looks as follows : interface GigabitEthernet x/x/x switchport access vlan 2700 --> Configuration changed switchport mode access --> Configuration changed switchport voice vlan 671 shutdown Finally, when we unshut interface again & wait for authentication to complete, the interface configuration goes back to normal. Fact of having dynamic configuration applied to the port (once it goes down) impacts further port operation when different type of client connects & tries to authenticate on the port.
- Cat9400 running 16.9.3 - IBNS 1.0 and ISE 1.4
To enable 802.1x Supplicant and Authenticator Switches with Network Edge Access Topology (NEAT), the recommendation is to select the NEAT option in the authorization profile. The NEAT feature will configure the cisco-av-pair as device-traffic-class=switch at the ISE. When the authenticator downloads the authorization profile, it automatically enables the trunk configuration on the authenticator switch. If an access VLAN is configured on the authenticator switch, it becomes the native VLAN for the trunk port after successful authentication. Pushing down a template to configure the native VLAN is not required.
Click on a version to see all relevant bugs
Cisco Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.