Symptom

Port profile config is showing under interfaces that are inheriting, but only when the # of switchport trunk allowed vlan' s has alot of VLAN's. When I just allow 5-6 VLAN's the issue is not present, and the interfaces that inerit are not showing the full config.

Conditions

++working condition: interface Ethernet3/1 inherit port-profile HP-VC-DATA speed 1000 no shutdown SJCK-302.08.12-N7K-2(config-if)# sh port-profile port-profile HP-VC-DATA type: Ethernet description: status: enabled max-ports: 512 inherit: config attributes: switchport switchport mode trunk spanning-tree port type edge trunk mtu 9216 storm-control broadcast level 0.10 switchport trunk allowed vlan 1-2, 10, 20, 30 no shutdown evaluated config attributes: switchport switchport mode trunk spanning-tree port type edge trunk mtu 9216 storm-control broadcast level 0.10 switchport trunk allowed vlan 1-2, 10, 20, 30 no shutdown assigned interfaces: Ethernet3/1 Ethernet3/2 !! Broken condition port-profile HP-VC-DATA type: Ethernet description: status: enabled max-ports: 512 inherit: config attributes: switchport switchport mode trunk spanning-tree port type edge trunk mtu 9216 storm-control broadcast level 0.10 switchport trunk allowed vlan 1-13, 31-38, 52-60, 63-66, 78-93, 101-111, 114-1 16, 119, 230, 250-273 no shutdown evaluated config attributes: switchport switchport mode trunk spanning-tree port type edge trunk mtu 9216 storm-control broadcast level 0.10 switchport trunk allowed vlan 1-13, 31-38, 52-60, 63-66, 78-93, 101-111, 114-1 16, 119, 230, 250-273 no shutdown assigned interfaces: Ethernet3/1 Ethernet3/2 interface Ethernet3/1 inherit port-profile HP-VC-DATA switchport trunk allowed vlan 1-13, 31-38, 52-60, 63-66, 78-93, 101-111 switchport trunk allowed vlan add 114-116, 119, 230, 250-273 speed 1000 no shutdown

Workaround

none known at this time

Further Problem Description