Overview

NOTE: The images in this procedure are for demonstration purposes only and may not specifically match your printer model; colors, icons, and other minor differences may exist. The stapler in the booklet maker uses two staple cartridges labeled R2 and R3 Booklet stapling requires that both staple cartridges be free of jammed staples. WARNING: Do not perform this procedure while the printer is copying or printing. Open the finisher side cover. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening and slide them to the center. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher. Remove the jammed staples by pulling them in the direction shown. Hold the tabs on both sides of the staple cartridge and insert it into the original position in the finisher Note : If you have trouble inserting the cartridge, make sure the staples are positioned correctly in the cartridge. Note : The booklet maker uses two staple cartridges Booklet stapling requires that both staple cartridges contain staples. Starting at Step 2, repeat the procedure for the other staple cartridge. Close the side cover of the finisher.