Overview

NOTE: The images in this procedure are for demonstration purposes only and may not specifically match your printer model; colors, icons, and other minor differences may exist. WARNING: Do not perform this procedure while the device is copying or printing. Open the Finisher Front Door. Reach into the finisher cabinet and pull the stapler toward you until it stops. Grasp the R1 lever on the staple cartridge, and then slide the cartridge to the right Grasp the staple cartridge by the orange lever, and then lift up on the lever to remove the cartridge from the machine. Make sure there are no staples left inside of the Finisher. Pull up on the front lever on the staple cartridge. Remove the entire staple sheet including the jammed staple. WARNING: The points of the jammed staples are sharp Remove the jammed staples carefully. NOTE: Remove the entire staple sheet Do not just remove the jammed staple. Pull down on the front lever on the staple cartridge until it clicks into place Grasp the staple cartridge by the orange lever, and then insert it into the Finisher until it clicks into position. Close the Finisher Front Door A message will be displayed on the Touch Screen if the door is not completely closed.