Overview

Locate the Device Name Locate the Serial Number Register the Device Deregister the Device Using the Touch Screen Deregister the Device in EFI Self-Serve AdminCentral           Locate the Device Name : Before deregistering the kiosk, it is important to have a separate record of the device name The device name is required for kiosk registration When the kiosk has been deregistered for any reason, you must register the kiosk again before it can be used. Note : Xerox strongly recommends that the administrator maintains a list or spreadsheet of all device names and their respective kiosk serial numbers The device name is used specifically for kiosk  deregistration and registration.   The kiosk serial number is used specifically for service calls. IMPORTANT : You must know the login information in order to perform this procedures If necessary, contact your System Administrator for additional assistance. To locate the device name:   Return to Top           Locate the Kiosk Serial Number :  The kiosk serial number label is located behind the door on the left side of the kiosk.   Return to Top           Register the Device : Before the first use or before using the kiosk after it has been deregistered, you must register the kiosk. Note : Ensure that you have an unregistered kiosk defined in EFI Self-Serve AdminCentral for the location for which you are registering the kiosk. To register the kiosk:   Return to Top           Deregister the Device Using the Printer Touch Screen : Important : Before deregistering the kiosk, make a note of the Device Name See the Locate the device name section for additional information. To deregister the kiosk:   Return to Top           Deregister the Device in EFI Self-Serve AdminCentral : Important : Before deregistering the kiosk, make a note of the Device Name See the Locate the Device Name section for additional information. Note : Use this method only if you are not able to deregister the device at the kiosk touch screen See the Deregister the Device Using the Printer Touch Screen section for additional information. To deregister the device in EFI Self-Serve AdminCentral:   Return to Top   From the left edge of the printer touch screen, swipe from left to right. Touch Payment Login . For UserID, type the email address for your EFI Self-Serve AdminCentral merchant account For Password, type the password for your EFI Self-Serve AdminCentral merchant account. From the menu, select Device Information . Make a note of the Device Name To exit, touch X . Touch the arrow in the top left corner of the Payment screen.  From the left edge of the printer touch screen, swipe from left to right. Touch Payment Login . At the kiosk touch screen, type your EFI Self-Serve AdminCentral merchant email address and password. Touch OK . If prompted, select the Region and the District, then touch Next after each selection. Select the Location, then touch Next . Select the Device Name for this kiosk, then touch Next See the Locate the Device Name section for additional information. Touch OK . After touching OK, observe the following:  A confirmation message appears, indicating that the device was successfully registered. Any available upgrades for the kiosk user interface and the credit card reader are installed. The registration confirmation message appears again. A confirmation message appears, indicating that the device was successfully registered. Any available upgrades for the kiosk user interface and the credit card reader are installed. The registration confirmation message appears again. From the left edge of the printer touch screen, swipe from left to right. Touch Payment Login . For UserID, type the email address for your EFI Self-Serve AdminCentral merchant account For Password, type the password for your EFI Self-Serve AdminCentral merchant account. From the menu, select Deregister A confirmation message appears.   To re-register the kiosk, refer to the Register the Device section.   Log in to your EFI Self-Serve AdminCentral merchant account.  Refer to [ Login to Your EFI Self-Serve AdminCentral Account . Select the Dashboard tab. In the list, locate the device name for the kiosk to be deregistered, then click Actions . Select Deregister . To proceed, click Yes . To re-register the kiosk, refer to the Register the Device section.