Overview

Note: If procedures in this manual do not rectify the problem an authorized technician will be needed. The fault codes are displayed with the LEDs on the control panel. When a fault occurs, the lights will turn on indicating the number of the fault code in LED(s) either in Red (Hard-Stop = Printer immediately stops) or Yellow (Soft-Stop = Printer finishes batch then stops) If more than one fault code occurs the Status LED blinks Red, additional fault code(s) can be viewed by toggling the Table Positioning Lever. Note : If the following steps do not rectify the problem an authorized technician will be required. Note : For any other fault, Power off / Power on the Stacker For more information, refer to  Power off and on the Stacker