Overview

Guidelines for Printing Labels: To Load Labels in the Multipurpose Feeder: Labels can only be printed from the Multipurpose Feeder See Paper Specifications  for more details. Labels, envelopes, and card stock always print at reduced speed. Labels are supported for occasional use and must be tested for acceptability. Use labels designed for laser printing. Do not use vinyl labels. Do not feed a sheet of labels through the printer more than once. Do not use dry gum labels. Print only on one side of the sheet of labels. Store unused labels flat in original packaging Leave the sheets of labels inside the original packaging until ready to use Return any unused sheets of labels to the original packaging and reseal it. Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions Storing sheets in extreme conditions can cause print quality problems or cause the sheets to jam in the printer. Rotate stock frequently Long periods of storage in extreme conditions can cause labels to curl and jam in the printer. In the print driver software, select  Label  as the paper type. Remove all other paper from the tray before loading labels. CAUTION : To avoid damage to the printer, do not use any sheet where labels are missing, curled, or pulled away from the backing sheet. Open the multipurpose feeder. Load a stack of labels with the printable side face-down. Adjust the guide to match the size of the paper that you are loading. From the control panel, set the paper size and paper type to match the paper loaded.