Overview

Note:  For Guidance on Cybersecure and Safe Return to the Office see the  Related Content . Before powering on your printer, make sure that the appropriate conditions are set for the printer When a printer has been left idle for an extended period of time problems may occur depending on the length of idle time, and environmental factors, such as temperature and humidity. For details, refer to your environmental specifications. If the printer was left powered on, power the printer off, wait two minutes, then power on the printer Note:  This operation resets and reinitializes all components in the printer. If the printer has been powered off, power it on Wait for the printer to complete its power-up sequence to power on all installed options. If the printer does not power on: Power off the printer and unplug the unit from the wall outlet Wait two minutes, plug the printer back into the outlet and power on. Make sure the power cord is correctly installed and fully plugged into a functioning power outlet and the printer. Contact Support for additional assistance. If the printer was left powered on, power the printer off, wait two minutes, then power on the printer Note:  This operation resets and reinitializes all components in the printer. If the printer has been powered off, power it on Wait for the printer to complete its power-up sequence to power on all installed options. If the printer does not power on: Power off the printer and unplug the unit from the wall outlet Wait two minutes, plug the printer back into the outlet and power on. Make sure the power cord is correctly installed and fully plugged into a functioning power outlet and the printer. Contact Support for additional assistance. Power off the printer and unplug the unit from the wall outlet Wait two minutes, plug the printer back into the outlet and power on. Make sure the power cord is correctly installed and fully plugged into a functioning power outlet and the printer. Contact Support for additional assistance. Check if paper in each paper tray is in good condition Jams and image quality issues can be caused from poor paper condition. Dispose of the top five sheets in each tray. Dispose of paper that appears wrinkled, curled, damp, discolored or damaged. Fan the remaining sheets. Load paper in the paper trays as required. Dispose of the top five sheets in each tray. Dispose of paper that appears wrinkled, curled, damp, discolored or damaged. Fan the remaining sheets. Load paper in the paper trays as required. Print a small print job to test the print quality. If a fault code or an error occurs, restart your search to troubleshoot the specific error Contact Support for additional information as required. Cybersecure and Safe Return to the Office