Overview

Note: Do not load paper above the Max line on the rear edge guide. Select the appropriate paper for your print job. Pull out the tray slowly until it stops. Open the ream of paper with the seam side facing up. Before loading paper into the tray, fan the sheets of paper. Load the hole-punch paper against the left edge of the tray Align the paper so that the holes are against the left edge of the tray, and ensure that the paper is loaded in the Long Edge Feed (LEF) orientation. To adjust the paper guides, press in the guide release and move the edge guide carefully until it touches the edge of the paper in the tray. Note: Do not load paper above the Max line on the rear edge guide. Gently push in the tray until it stops.If enabled by your system administrator, the Paper Tray Settings screen appears on the touch screen. If you made changes to the paper tray, touch Change Settings , then correct the information If you did not make any changes, proceed to the next step. For Paper Type / Paper Weight , Paper Size , and Paper Color , select options as needed. If necessary, make changes to the paper curl and alignment adjustment options. Touch Save on each screen until you return to the tray settings window. For Paper Type / Paper Weight , Paper Size , and Paper Color , select options as needed. If necessary, make changes to the paper curl and alignment adjustment options. Touch Save on each screen until you return to the tray settings window. Touch Confirm .