Overview

Note: A video is available at the end of this solution. Note: Do not load paper above the Max line on the rear edge guide. Note: Do not load paper above the Max line on the rear edge guide. Video : Select the appropriate paper for your print job. Pull out the tray slowly until it stops. Open the ream of paper with the seam side facing up. Before loading paper into the tray, fan the sheets of paper. Load and align the edge of the paper against the left edge of the tray. Note: You can load paper in the Long Edge Feed (LEF) portrait orientation or the Short Edge Feed (SEF) landscape orientation. To adjust the paper guides, press in the guide release and move the edge guide carefully until it touches the edge of the paper in the tray. Note: Do not load paper above the Max line on the rear edge guide. Gently push in the tray until it stops.If enabled by your system administrator, the Paper Tray settings screen appears on the touch screen. If you made changes to the paper tray, touch Change Settings , then correct the information If you did not make any changes, proceed to the next step. For Paper Type / Paper Weight , Paper Size , and Paper Color , select options as needed. If necessary, make changes to the paper curl and alignment adjustment options. Touch Save on each screen until you return to the tray settings window. Touch Confirm . For Paper Type / Paper Weight , Paper Size , and Paper Color , select options as needed. If necessary, make changes to the paper curl and alignment adjustment options. Touch Save on each screen until you return to the tray settings window. Touch Confirm .