Overview

At the Control Panel touch screen, touch Device , then touch Tools . Touch Device Settings . Touch Output . To prioritize copy and print jobs, select Contention Management Select an option. Priority: This option specifies the relative priority of the copy or print jobs The lower the number, the higher the priority. First In/First Out: This option schedules jobs to print based on their entry into the Job Queue. Priority: This option specifies the relative priority of the copy or print jobs The lower the number, the higher the priority. First In/First Out: This option schedules jobs to print based on their entry into the Job Queue. To specify the output location for jobs, select Output Location , and then select an option. To separate print sets within a print job, select Within Job Offsetting , then select Enable or Disable . Note: If you select Disable, the device stacks all printed sets together. To specify how the device handles a print job that requires staples when the stapler is empty, select Out of Staples Options , then select an option. To save the settings, touch OK . Note: Not all options listed are supported on all devices Some options apply only to a specific device model, configuration, operating system, or driver type Some options are available only if a finisher is installed.