Overview

Note: Not all options listed are supported on all devices Some options apply only to a specific device model, configuration, operating system, or driver type Some options are available only if a finisher is installed. At the control panel touch screen, touch Device , then touch Tools . Touch Device Settings . Touch Output . To prioritize copy and print jobs, select Contention Management Select an option, then touch OK . Priority : This option specifies the relative priority of the copy or print jobs The lower the number, the higher the priority. First In/First Out : This option schedules jobs to print, based on their entry into the Job Queue. Priority : This option specifies the relative priority of the copy or print jobs The lower the number, the higher the priority. First In/First Out : This option schedules jobs to print, based on their entry into the Job Queue. To specify how the device handles a print job that requires staples when the stapler is empty, select Out of Staples Options Select an option, then touch OK . To specify the default output location for jobs that do not have finishing options, select Output Location Select an option, then touch OK . To specify where the device applies staples to a print job, select Staple Productivity Mode , select an option, then touch OK . To specify whether jobs are offset in the output tray, touch Offset As needed, select or clear the check boxes for Center Tray Offset, Offsetting of Sets Within Jobs , and Conditional Finisher Offset Touch OK .