Overview

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, keep the tray closed until needed. Remove the tray. Note : To avoid paper jams, do not remove the tray while the printer is busy. Adjust the guides to match the size of the paper that you are loading. Note: Use the indicators on the bottom of the tray to position the guides. Flex, fan, then align the paper edges before loading. Load the paper stack with the printable side face-up. Load letterhead face-up with the header toward the back of the tray for one-sided printing. Load letterhead face-down with the header toward the front of the tray for two-sided printing. Do not slide paper into the tray. Load letterhead face-up with the header toward the back of the tray for one-sided printing. Load letterhead face-down with the header toward the front of the tray for two-sided printing. Do not slide paper into the tray. To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator. Insert the tray. If necessary, set the paper size and paper type to match the paper loaded in the tray.