Loading...
Loading...
Before port bounce the PC has a IP address and the Security status for the PC shows "Link Secured" in the "show authentication session interface detail" output. After the port bounce the PC loses the IP address and the security status no longer shows up in the same ouput. On the PC the AnyConnect status shows "Authenticating" indefinitely.
Anyconnect - 4.6 PC - Windows Switch - 9400 running 16.9.3 Phone - 8841 Switch is configured with the default "should secure" policy for MKA.
To recover from this state, PC is removed and reconnected to the IP Phone PC port, or PC is rebooted. If IP phones are incapable of doing MKA, then push a "Must Not Secure" Policy from ISE in the authorization profile. This will prevent the switch from starting an MKA negotiation for the IP Phone.
With Cat9400 on 16.9.3 using macsec on the downlink (switch to host encryption), PC configured for 802.1x authentication macsec on the NAM supplicant, and the PC behind 8841 phone will lose IP address and link security status after port bounce. Before port bounce the PC has a IP address and the security status for the PC shows "Link Secured", after the port bounce the PC loses the IP address and the security status no longer shows up, on the PC the AnyConnect status shows to be constantly authenticating. The cause for this appears to be the switch starting an MKA negotiation for the IP phone, during an ongoing MKA negotiation for the PC.
Click on a version to see all relevant bugs
Cisco Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.