Symptom
G.8032 R-APS frames will start flooding over the R-APS channel of the G.8032 Ring.
This will result in incorrect G.8032 state in Ring nodes and not insync with RPL owner.
Conditions
Egress service-policy applied over ring interface when both ring interfaces are open/Fwding such that one of them becoming a new blocked port in Pending/Idle state.
Workaround
This problem can be avoided by removing the egress service policy from the ring interfaces.
Further Problem Description
G.8032 Ring might not converge and L2 VLAN path protection might not be achieved using G.8032 protocol.
