OG <<<<<<< [4322193.134075] cctrl DBG: cctrl_ow_write dev_type 5 data 4f [4322193.135114] cctrl DBG: cctrl_ow_write dev_type 5 data 4f [4322193.135116] CCTRL PANIC DUMP [4322193.135117] ========================= [4322193.135119] WDT last punched at 1531683159 [4322193.135122] REG(0x300) = 0 [4322193.135124] REG(0x304) = 0 [4322193.135125] ========================= [4322193.135127] [1531683159] Kernel panic - not syncing: WATCHOG HIT The current EPLD firmware version can be checked with the command: show version module 1 epld NOTE: Upgrading the NX-OS alone is not sufficient. EPLD must be upgraded if older than 7.0(3)I2(2b). To get the fix for this issue, it is recommended to upgrade the EPLD to 7.0(3)I2(2b) onwards. On the following link we have the process of EPLD upgrade: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/epld_rn/guide/nxos_n9K_epldRN_703i72.html2a:T58a,Symptom: Nexus 9K device crash due to FPGA WATCHDOG Check the output of the commands below to confirm the same: N9K#show logging onboard stack-trace [4322193.075963] [1531683159] NMI due to FPGA WATCHDOG <<<<<<< [4322193.134075] cctrl DBG: cctrl_ow_write dev_type 5 data 4f [4322193.135114] cctrl DBG: cctrl_ow_write dev_type 5 data 4f [4322193.135116] CCTRL PANIC DUMP [4322193.135117] ========================= [4322193.135119] WDT last punched at 1531683159 [4322193.135122] REG(0x300) = 0 [4322193.135124] REG(0x304) = 0 [4322193.135125] ========================= [4322193.135127] [1531683159] Kernel panic - not syncing: WATCHOG HIT The current EPLD firmware version can be checked with the command: show version module 1 epld NOTE: Upgrading the NX-OS alone is not sufficient. EPLD must be upgraded if older than 7.0(3)I2(2b). To get the fix for this issue, it is recommended to upgrade the EPLD to 7.0(3)I2(2b) onwards. On the following link we have the process of EPLD upgrade: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/epld_rn/guide/nxos_n9K

OPERATIONAL DEFECT DATABASE

Cisco - Defect ID: CSCvm19435

Crypto not updated post standby IP address change

Cisco - Defect ID: CSCvm19435

Crypto not updated post standby IP address change

Last updated on April 26th, 2025

BugZero Risk Score6.0 Medium

Bug Details

Symptom

Conditions

Workaround

Further Problem Description

Links

Top Cisco Defects

Ready to prevent the next vendor outage?

BugZero Risk Score
6.0 Medium