Overview

Use the bypass tray for a variety of media types and custom sizes The bypass tray is intended primarily for small-quantity jobs using special media The bypass tray is on the left side of the printer A tray extension is provided to accommodate larger paper After loading paper in the bypass tray, ensure that the tray settings on the touch screen match the paper size and type loaded. Tray Capabilities To load paper in Tray 5 (Bypass Tray): Note : Do not load paper above the maximum fill line.. Tray 5 can hold up to 250 sheets of 90 g/m 2 paper. Tray 5 can accept paper from 64-300 g/m 2 . Tray 5 can accommodate paper sizes from postcard (4 x 6 in.) to SRA3 (320 x 450 mm), or 13.2 x 19.2 in. Open tray 5 and pull out the extension tray for larger sizes If the tray is loaded with paper already, remove paper that is a different size or type. Move the width guides to the edges of the tray. Insert the paper either long-edge or short-edge first, face up Larger paper sizes can be fed only short-edge first Load hole-punched paper with the holes to the right Load labels and transparencies face up with the top edge toward the front of the tray. Adjust the width guides until they touch the edges of the stack. If necessary, select an option on the control panel touch screen: To choose paper size, type, or color, touch Paper Supply . To choose a specific stock, touch Paper Catalog , then select the paper. To choose paper size, type, or color, touch Paper Supply . To choose a specific stock, touch Paper Catalog , then select the paper. Touch Save , then touch Confirm . If you have not changed the paper type, touch Cancel to retain the previous settings.