Overview

IMPORTANT: The Fiery documentation may mention “Fiery.1” as the default password Do not use this password when you log on to the Fiery server for the first time. Instead, print a Fiery Server Configuration page and look for ID in the BIOS Setup section (listed under RIP).  For a stand-alone Fiery server, the default password is listed in the ID field For the integrated Fiery server, the default password is the first 14 alphanumeric characters listed in the ID field. For additional Fiery password information, go to www.efi.com and search on “unique password”. Note : If you reinstall the Fiery system software or restore factory default settings, the administrator password will be replaced by “Fiery.1” Use “Fiery.1” to log on to the Fiery server and then change the password to prevent unauthorized usage. Print a Fiery Server Configuration page, and look for ID in the BIOS Setup section, listed under RIP. For a stand-alone Fiery server, the default password is listed in the ID field For the integrated Fiery server, the default password is the first 14 alphanumeric characters listed in the ID field. The password is case sensitive. If the problem persists, contact Support for additional assistance.