Overview

Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to manage and monitor devices on your network. You can use the SNMP configuration pages in the Embedded Web Server to: Enable SNMP Enable or disable Authentication Failure Generic Traps. Enable SNMPv3 to create an encrypted channel for secure printer management. Assign privacy, authentication protocols, and keys to Administrative and key user accounts. Assign read and write access to User accounts. Limit SNMP access to the printer using hosts. In the Embedded Web Server, click Properties > Connectivity > Setup . In the Protocol area, for SNMP, click Edit . For SNMPv1/v2c, select Enable SNMP v1/v2c Protocols , then select an option: To enable SNMPv1/v2c for read and write access, select the check box for Allow SNMP v1/v2c Set . To enable SNMPv1/v2c for read-only access, clear the check box for Allow SNMP v1/v2c Set . To enable SNMPv1/v2c for read and write access, select the check box for Allow SNMP v1/v2c Set . To enable SNMPv1/v2c for read-only access, clear the check box for Allow SNMP v1/v2c Set . To configure SNMPv1/v2c, click Edit SNMP v1/v2c Properties.  For SNMPv3, select Enable SNMP v3 Protocol, then select an option. To enable SNMPv3 for read and write access, select the check box for Allow SNMP v3 Set . To enable SNMPv3 for read-only access, clear the check box for Allow SNMP v3 Set . To enable SNMPv3 for read and write access, select the check box for Allow SNMP v3 Set . To enable SNMPv3 for read-only access, clear the check box for Allow SNMP v3 Set . To configure SNMPv3, click Edit SNMP v3 Properties .  To prompt the printer to generate a trap for every SNMP request that is processed with an invalid community name, for Authentication Failure Generic Traps, select Enabled . Click Save .