Overview

Note: There are two different optional office finishers available with the printer Use the procedure for the finisher installed on your printer If your finisher front door swings down, use the procedure for the Office Finisher In contrast, if your finisher front door swings to the right, use the procedure for the Office Finisher LX. Clear Jams Under the Top Cover of the Office Finisher LX WARNING: Do not perform this procedure while the printer is printing. Clear Jams in the Office Finisher LX Transport Pull up the lever on the top cover of the Office Finisher. To open the top cover, rotate it to the left. Remove the jammed paper. Note:  If the paper is torn, remove all torn pieces from the finisher. Close the top cover of the Office Finisher. To open the transport cover, lift the handle of the centre tray straight up. Remove the jammed paper. Note:  If the paper is torn, remove all torn pieces from the finisher. Close the transport cover.