Overview
Note
: It is important to confirm that the appropriate waste bottle is being used
See
Order Supplies, Consumables and Parts
for more information on how to order supplies and consumables
The 008R08101 is intended for low-speed devices (B8145/B8155), while the 008R08102 is meant for high-speed devices (B8170).
When it is time to replace the waste container, a message appears on the control panel.
When you replace the waste container, clean the printhead lens
For details, refer to
Clean the Printhead Lens.
Caution
:
Spread paper on the floor to catch possible toner spills.
Warning:
If you spill any toner in the printer, wipe it up using a moist cloth
Never use a vacuum cleaner to remove spilled toner
Sparks inside the vacuum cleaner can cause a fire or explosion.
Warning
:
If you accidentally get toner on your clothes, lightly dust them off as best as you can
If some toner remains on your clothes, use cool water, not hot, to rinse off the toner
If toner gets on your skin, wash it off with cool water and a mild soap
If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.
Note:
Each waste container includes installation instructions.
To replace the waste container:
Caution:
Do not perform this procedure when the printer is copying or printing.
Open the front cover of the printer
Remove the new waste container from the packaging
Retain the packaging
Pull the used waste container out slowly while supporting it with your other hand.
Place the used waste container in the plastic bag, then seal the bag firmly using the zipper
Place the used waste container in the empty box
Hold the left side of the new waste container and slide it into the printer until it clicks
Clean the printhead lenses
For details, refer to
Clean the Printhead Lens.
Close the printer front cover.