Overview
Access the Embedded Web Server and login as the System Administrator.
Select
Properties
.
Select
Connectivity
.
Select
Setup
.
Select
Edit
to the right of
Raw TCP/IP Printing
, under
Protocol
.
Select
Enabled
under
Protocol
.
Set
TCP Port Number 1
to 9100.
Note
: To emulate HP JetDirect EX Plus 3, set Port 2 to 9101 and Port 3 to 9102.
Select
Enabled
under each active port for
Bidirectional
.
Enter a number from 1 through 32 for each active port for
Maximum Connections per Port (1-32)
.
Enter a time in seconds from 0 through 1800 for
End of Job Timeout (0 - 1800)
for each active port.
Select
Enabled
for
PDL Switching
for each active port.
Note
: PDL Switching allows the printer to switch automatically between multiple supported PDLs within a single job.
Select
Apply
to save the new settings.
Reboot the Printer through the Embedded Web Server.
