Overview

When you have an image quality issue caused by contaminants in the fuser, run the Clean Fuser Assembly routine from the Tools menu For example, use this feature when you see dry ink/toner debris on the back side of prints. The press automatically runs this routine periodically However if you see image quality problems with dry ink/toner on the back of prints, you can initiate this procedure manually. Note: If you still notice contaminants on the back of the prints after running this procedure, contact Xerox Service Dry ink/toner debris can originate from either one of two areas in the press: the Transfer Roll or the Fuser Assembly Roll. Clean Fuser Assembly Methods The Clean Fuser Assembly feature provides two methods for running the routine: Note:  You must be logged in as an administrator in order to use the  Clean with Felt method. Clean with Paper: This method runs blank sheets through the press to remove any  residual dry ink / toner from the fuser Note: Any press operator can use the Clean with Paper method. This cleaning method  does not require administrator login. Clean with Felt: This method uses felt that is equipped inside the press to remove  any dry ink / toner from the fuser Simply apply the felt against the pressure roll, and any residual dry ink/toner is removed. Clean the Fuser Assembly With Paper Clean the Fuser Assembly With Felt