Loading...
Loading...
Document VersionRelease DateDetails2July 19, 2022Updated the Resolution with the permanent fix, iLO 5 firmware v2.70.1April 29, 2022Original Document Release.HPE Integrated Lights-Out 5 (iLO 5) displays a random status of "unknown" for embedded NICs after a cold boot.This issue does not affect the functionality of the NICs. This could be an issue if using this value for scripted deploys. When using the REST output for the network adapter status of servers on iLO 5, checking the "status" of the base network adapter target on the iLO may not change from unknown after POST finishes.When functioning correctly, after the Power-On Self-Test (POST) finishes and the server reaches the network boot cycle, the Device status for embedded NICs from unknown to "enabled" (in DeviceInventory) and the adapter and port status to "ok" (in "network" tab under system information) is displayed. When this issue occurs, this status does not change to enabled/OK after POST finishes. The NIC ports are linked and active.This has been observed on a system with the HPE Ethernet 1Gb 4-port 331i and HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter; however, this may occur on other network adapters.
Any HPE system with iLO 5 2.65 (or earlier) with embedded NICs during scripted deploy.
To resolve this issue, update the iLO 5 firmware to v2.70 (or later).To download the iLO 5 firmware v2.70 (or later), perform the following steps:Click the following link:Hewlett Packard Enterprise Support CenterThe page should refresh to display the "DRIVERS AND SOFTWARE" tab and the components that support the iLO 5.Locate and select theHPE Integrated Lights-Out 5 v2.70 firmware(or later).Note: To ensure that you have selected the latest version of the firmware/driver, click the Revision History tab to check if a new version of the firmware/driver is available.For more important information, review the Release Notes tab.Click theDownloadbutton.As a workaround, reset iLO 5 to recover the status.RECEIVE PROACTIVE UPDATES: Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively in your e-mail through HPE Support Alerts.Sign up for Support Alerts at the following URL:HPE Email Preference CenterNAVIGATION TIP:For hints on navigating HPE.com to locate the latest drivers, patches and other support software downloads, refer to theNavigation Tips document.SEARCH TIP:For hints on locating similar documents on HPE.com, refer to theSearch Tips document.
Operating Systems Affected:Not Applicable
Click on a version to see all relevant bugs
Hewlett Packard Enterprise Integration
Learn more about where this data comes from
BugZero Plan
Streamline upgrades with automated vendor bug scrubs
BugZero Prevent
Wish you caught this bug sooner? Get proactive today.