Loading...
Loading...
In a new PowerStore deployment, During cluster creation (ICW), Network validation check comes back with the following error: reason":{"code":"0xE0E800300010","severity":"Error","message_l10n":"The node A is not reachable from the node B via ICMP ping of native VLAN address. This will prevent NAS services from being installed.","arguments":["A","B"]},"resolution":{"code":"0xE0E800300010.resolution","severity":"Info","message_l10n":"Ensure that the physical switches are configured properly."},"applianceId":"8H02643"}, {"reason":{"code":"0xE0E800300010","severity":" Error","message_l10n":"The node B is not reachable from the node A via ICMP ping of native VLAN address. This will prevent NAS services from being installed .","arguments":["B","A"]},"resolution":{"code":"0xE0E800300010.resolution","severity":"Info","message_l10n":"Ensure that the physical switches are configured properly."},"applianceId":"8H02643"}, {"reason":{"code":"0xE0E70060000E","severity":"Warning","message_l10n":"Onboard management ports are connected to the same ethernet switch 2c:33:11:d3:a9:80.","arguments":["2c:33:11:d3:a9:80"]},"resolution":{"code":"0xE0E70060000E.resolution","severity":"Info","message_l10n":"You may cable both nodes to the same switch, if you cannot provision two management switches. But, for high availability purposes, it is recommended that you configure two switches, and connect nodes A and B of the appliance to alternate switches."},"applianceId":"8H0264
SDNAS/ NAS Services required IPv6 capability on Data Switches. In NONE Dell TOR, there is a chance that IPv6 is NOT enabled as required.
Customer and support/deployment services can work with the network admins to ensure the following: IPv6 is required enablement for NAS operations. As of 1.0.3, SP3, the Intra Cluster IPv6 communications is using internal physical layer instead of the LACP port channel. However deploying Unified configuration requires IPV6 on the LACP still, for NAS operations. Also, the native vlan must be allowed on the LACP port channel configuration. The following is a configuration sample showing other vlans allowed while the vlan id is different: interface port-channel70 description "Connected to New SAN" switchport switchport mode trunk switchport trunk native vlan 999 switchport trunk allowed vlan 5,10,50 ==> add 999 here vpc 70 interface port-channel71 description "Connected to New SAN" switchport switchport mode trunk switchport trunk native vlan 900 switchport trunk allowed vlan 5,10,50 ==> add 900 here vpc 71
Click on a version to see all relevant bugs
Dell Integration
Learn more about where this data comes from
Bug Scrub Advisor
Streamline upgrades with automated vendor bug scrubs
BugZero Enterprise
Wish you caught this bug sooner? Get proactive today.