OPERATIONAL DEFECT DATABASE
...
...
This DDTs is for new rommon release 17.6(6r) auto-upgrade. This upgrade will address errors with the PCIe Bus as well as kernel errors such as the following: %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, (Receiver ID) %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: device [8086:19aa] error status/mask=00000020/00000000 %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: [ 5] SDES (First) %IOSXE-3-PLATFORM: R0/0: kernel: igb 0000:23:00.0 fpe0: PCIe link lost, device now detached %IOSXE-3-PLATFORM: R0/0: kernel: igb 0000:23:00.1 fpe1: PCIe link lost, device now detached %IOSXE-3-PLATFORM: R0/0: kernel: igb 0000:23:00.2 fpe2: PCIe link lost, device now detached %TRANSCEIVER-6-INSERTED: C0/0: iomd: transceiver module inserted in Gigabitethernet0/0/3 %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: device [8086:19aa] error status/mask=00000001/00002000 %IOSXE-3-PLATFORM: R0/0: kernel: pcieport 0000:00:10.0: AER: [ 0] RxErr %TRANSCEIVER-3-INIT_FAILURE: C0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/3, module disabled %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to down %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to down %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to down
This issue has been seen on some C8200 routers when running an old version of rommon.
A power cycle can temporarily clear the issue, however the issue may reoccur.
A fix for this issue is contained in rommon version 17.6(6r). As of IOS-XE 17.4.x rommon on C8200, 17.5.x rommon on C8200L are bundled with the IOS-XE image and automatically upgraded if the bundled rommon version is higher than the current rommon version. IOS-XE 17.6.6, 17.9.4 and later will contain the rommon version with the fix for this issue. For customers seeing i210 NIC PCIE erros that needs to RMA the boards, this rommon has the fix.
Click on a version to see all relevant bugs
Cisco Integration
Learn more about where this data comes from
Bug Scrub Advisor
Streamline upgrades with automated vendor bug scrubs
BugZero Enterprise
Wish you caught this bug sooner? Get proactive today.
