Symptom

CLI "no ip proxy-arp" isn't visible under TenGigabit SVI and Loopback interfaces in show sdwan run. However it's visible in Gigabit interfaces, and in regular show run. This is due to the "no ip proxy-arp" command being hidden on TenGig, SVI, and Loopback interfaces. Example: cEdge#show run interface GigabitEthernet0/0/4.952 description LAN952 encapsulation dot1Q 952 ip address 10.9.52.1 255.255.255.0 no ip redirects no ip proxy-arp <----------------------- ip mtu 1428 ! ! interface TenGigabitEthernet0/1/1.31 description LAN31 encapsulation dot1Q 31 vrf forwarding 31 ip address 10.0.31.1 255.255.255.250 no ip redirects no ip proxy-arp <----------------------- ip nbar protocol-discovery ! cEdge# cEdge#show sdwan run interface GigabitEthernet0/0/4.952 description LAN952 no shutdown encapsulation dot1Q 952 ip address 10.9.52.1 255.255.255.0 no ip redirects no ip proxy-arp <----------------------- ip mtu 1428 ! ! interface TenGigabitEthernet0/1/1.31 description LAN31 no shutdown encapsulation dot1Q 31 vrf forwarding 31 ip address 10.0.31.1 255.255.255.250 no ip redirects ip mtu 1500 ip nbar protocol-discovery !

Conditions

Running IOS-XE SD-WAN

Workaround

N/A, cosmetic

Further Problem Description