Purpose
This article provides information on the default QLogic driver/firmware versions included in the ESXi image.
Resolution
The QLogic driver versions which are included in ESXi images are: ESXi 5.1scsi-qla2xxx_902.k1.1-9vmw.510.0.0.799733scsi-qla4xxx_5.01.03.2-4vmw.510.0.0.799733 ESXi 5.0u2scsi-qla2xxx_901.k1.1-14vmw.500.2.26.914586scsi-qla4xxx_5.01.03.2-3vmw.500.2.26.914586 ESXi 5.0u1scsi-qla2xxx_901.k1.1-14vmw.500.1.11.623860scsi-qla4xxx_5.01.03.2-3vmw.500.1.11.623860 ESXi 5.0scsi-qla2xxx_901.k1.1-14vmw.500.0.0.469512scsi-qla4xxx_5.01.03.2-3vmw.500.0.0.469512 ESXi 4.1u3scsi-qla2xxx-400.831.k1.28.1-7vmw.3.26.800380.x86_64scsi-qla4xxx-400.5.01.03.1-10vmw.3.26.800380.x86_64 ESXi 4.1u2scsi-qla2xxx-400.831.k1.28.1-7vmw.2.11.502767.x86_64scsi-qla4xxx-400.5.01.03.1-10vmw.2.11.502767.x86_64 ESXi 4.1u1scsi-qla2xxx-400.831.k1.28.1-1vmw.1.4.348481.x86_64scsi-qla4xxx-400.5.01.03.1-10vmw.1.4.348481.x86_64 ESXi 4.1scsi-qla2xxx-400.831.k1.28.1-1vmw.0.0.260247.x86_64scsi-qla4xxx-400.5.01.03.1-9vmw.0.0.260247.x86_64
Related Information
To manually check the QLogic driver version installed on your ESXi host, run these esxcli commands: esxcli software vib get -n scsi-qla2xxxesxcli software vib get -n scsi-qla4xxxExample output:VMware_bootbank_scsi-qla4xxx_5.01.03.2-4vmw.510.0.0.799733Name: scsi-qla4xxxVersion: 5.01.03.2-4vmw.510.0.0.799733Type: bootbankVendor: VMwareAcceptance Level: VMwareCertifiedSummary: qla4xxx: scsi driver for VMware ESXDescription: Qlogic iSCSI HBA DriverReferenceURLs:Creation Date: 2012-08-02Depends: vmkapi_2_1_0_0, com.vmware.driverAPI-9.2.1.0, com.vmware.iscsi_linux-9.2.1.0Conflicts:Replaces:Provides: com.vmware.qla4xxx-9.2.1.0Maintenance Mode Required: TrueHardware Platforms Required:Live Install Allowed: FalseLive Remove Allowed: FalseStateless Ready: TrueOverlay: FalseTags: driver, modulePayloads: scsi-qla To manually check the QLogic firmware version for the HBAs installed on your ESXi host, run this command: cat /proc/scsi/qla*/* | grep -A6 "Host Device" | less Example output: Host Device Name vmhba1 BIOS version 1.26 FCODE version 1.17 EFI version 1.09 Flash FW version 4.00.90 ISP: ISP2432, Serial# MXK84940E8 -- Host Device Name vmhba2 BIOS version 1.26 FCODE version 1.17 EFI version 1.09 Flash FW version 4.00.90 ISP: ISP2432, Serial# MXK84940E8 Caution: Always use only the cat command when pulling information from /proc/.ESXi 用 QLogic HBA ドライバ/ファームウェアのデフォルト バージョンESXi 的默认 QLogic HBA 驱动程序/固件版本
