Issue

Description of problem: When a daemon-reload happens while systemd is mounting NFSv3 mounts, the mounts are performed but systemd units can fail with the following error: -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- Apr 30 11:32:33 vm-remotemounts8 systemd[1]: Mounting /mnt/1... Apr 30 11:32:36 vm-remotemounts8 systemd[1]: mnt-1.mount: Mount process finished, but there is no mount. Apr 30 11:32:36 vm-remotemounts8 systemd[1]: mnt-1.mount: Failed with result 'protocol'. Apr 30 11:32:36 vm-remotemounts8 systemd[1]: Failed to mount /mnt/1. -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- Reading the code and analyzing the corresponding systemd strace, it looks like the mount process exited but internally the mount state was not correct, even though the mount was effectively seen in /proc/1/mountinfo so correct state should be there: -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- 1236 static void mount_sigchld_event(Unit *u, pid_t pid, int code, int status) { : 1260 (void) mount_process_proc_self_mountinfo(u->manager); : 1290 /* Note that due to the io event priority logic, we can be sure the new mountinfo is loaded 1291 * before we process the SIGCHLD for the mount command. */ 1292 1293 switch (m->state) { 1294 1295 case MOUNT_MOUNTING: 1296 /* Our mount point has not appeared in mountinfo. Something went wrong. */ 1297 ---> WE DIE HERE 1298 if (f == MOUNT_SUCCESS) { 1299 /* Either /bin/mount has an unexpected definition of success, 1300 * or someone raced us and we lost. */ 1301 log_unit_warning(UNIT(m), "Mount process finished, but there is no mount."); 1302 f = MOUNT_FAILURE_PROTOCOL; 1303 } 1304 mount_enter_dead(m, f); 1305 break; 1306 1307 case MOUNT_MOUNTING_DONE: 1308 mount_enter_mounted(m, f); 1309 break; -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- The strace shows the reload, then /proc/1/mountinfo showing /mnt/1, then the wait on the mount process (PID 1133): -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- (LINE NUMBER) (PID) (TIME + SYSCALL) 71183 1 11:32:35.075694 sendmsg(45<UNIX:[20271->11750]>, {msg_name=NULL, msg_namelen=0, msg_iov=[ {iov_base="PRIORITY=6\nSYSLOG_FACILITY=3\nCODE_FILE=../src/core/main.c\nCODE_LINE=1677\nCODE_FUNC=invoke_main_loop\nSYSLOG_IDENTIFIER=sy stemd\n", iov_len=126} , {iov_base="MESSAGE=", iov_len=8} , {iov_base="Reloading.", iov_len=10} , {iov_base="\n", iov_len=1}], msg_iovlen=4, msg_controllen=0, msg_flags=0}, MSG_NOSIGNAL <unfinished ...> : 92178 1 11:32:36.889019 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY|O_CLOEXEC <unfinished ...> : 92187 1 11:32:36.889841 <... read resumed>"357 97 0:47 / /mnt/4 rw,relatime shared:194 - nfs vm-nfs7-server:/mnt/4 rw,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.122.186,mou ntvers=3,mountport=20048,mountproto=tcp,local_lock=none,addr=192.168.122.186\n366 97 0:47 / /mnt/3 rw,relatime shared:199 - nfs vm-nfs7-server:/mnt/3 rw,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2, sec=sys,mountaddr=192.168.122.186,mountvers=3,mountport=20048,mountproto=tcp,local_lock=none,addr=192.168.122.186\n375 97 0:47 / /mnt/7 rw,relatime shared:204 - nfs vm-nfs7-server:/mnt/7 rw,vers=3,rsize=131072,wsize=131072,namlen=25 5,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.122.186,mountvers=3,mountport=20048,mountproto=tcp,local_lock=none,addr=192.168.122.186\n384 97 0:47 / /mnt/1 rw,relatime shared:209 - nfs vm-nfs7-server:/mnt/1 rw,vers= 3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.122.186,mountvers=3,mountport=20048,moun"..., 12534) = 1876 <0.000046> --> HERE ABOVE WE HAVE "/mnt/1" mount as well in /run/mount/utab: : 92206 1 11:32:36.890567 read(24</run/mount/utab>, "SRC=vm-nfs7-server:/mnt/8 TARGET=/mnt/8 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/5 TARGET=/mnt/5 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,add r=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/4 TARGET=/mnt/4 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/3 TARGET=/mnt/3 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nf s7-server:/mnt/7 TARGET=/mnt/7 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/1 TARGET=/mnt/1 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/6 TARGET=/mnt/ 6 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/9 TARGET=/mnt/9 ROOT=/ ATTRS=hard,nfsvers=3,proto=tcp,addr=192.168.122.186 \nSRC=vm-nfs7-server:/mnt/2 TARGET=/mnt/2 ROOT=/ ATTRS=hard,nfsvers=3 ,proto=tcp,addr=192.168.122.186 \n", 4096) = 900 <0.000008> : 92367 1 11:32:36.907043 waitid(P_ALL, 0, <unfinished ...> 92368 1 11:32:36.907104 <... waitid resumed>{si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=1133, si_uid=0, si_status=0, si_utime=0, si_stime=0}, WNOHANG|WEXITED|WNOWAIT, NULL) = 0 <0.000055> : 92389 1 11:32:36.909425 sendmsg(45<UNIX:[20271->11750]>, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="PRIORITY=4\nSYSLOG_FACILITY=3\nCODE_FILE=../src/core/unit.c\nCODE_LINE=5552\nCODE_FUNC=unit_log_failure\nSYSLOG_IDENTIFIER=sys temd\n", iov_len=126}, {iov_base="MESSAGE_ID=d9b373ed55a64feb8242e02dbe79a49c", iov_len=43}, {iov_base="n", iov_len=1} , {iov_base="UNIT=mnt-1.mount", iov_len=16} , {iov_base="\n", iov_len=1}, {iov_base="INVOCATION_ID=72dd55ec127f4f9 6a97d6d5549223188", iov_len=46}, {iov_base="n", iov_len=1} , {iov_base="MESSAGE=mnt-1.mount: Failed with result 'protocol'.", iov_len=51} , {iov_base="\n", iov_len=1} , {iov_base="UNIT_RESULT=protocol", iov_len=20} , {iov_base="\n", io v_len=1} ], msg_iovlen=11, msg_controllen=0, msg_flags=0}, MSG_NOSIGNAL <unfinished ...> -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- Version-Release number of selected component (if applicable): All systemd-239 including systemd-239-51.el8_5.5.x86_64 How reproducible: Always Steps to Reproduce: 1. Setup 9 NFSv3 mounts in /etc/fstab -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- vm-nfs7-server:/mnt/1 /mnt/1 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/2 /mnt/2 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/3 /mnt/3 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/4 /mnt/4 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/5 /mnt/5 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/6 /mnt/6 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/7 /mnt/7 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/8 /mnt/8 nfs rw,hard,nfsvers=3,proto=tcp 0 0 vm-nfs7-server:/mnt/9 /mnt/9 nfs rw,hard,nfsvers=3,proto=tcp 0 0 -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- 2. Create/enable a service reloading systemd just after rpc-statd.service finished (/etc/systemd/system/reload-systemd.service) -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- [Unit] After=network-online.target [Service] Type=oneshot ExecStart=/bin/sh -c '/bin/sleep 0.4; /bin/systemctl daemon-reload' [Install] WantedBy=multi-user.target -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- systemctl daemon-reload systemctl enable reload-systemd 3. Reboot and check the journal to "tune" the delay before executing the reload The delay must be adjusted for the reload to execute just after rpc-statd.service finished, e.g.! -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- journalctl -b -o short-precise | egrep "(/mnt/|Reloading|reload-systemd|status monitor|protocol)" [...] Apr 30 12:16:54.080946 vm-remotemounts8 systemd[1]: Starting reload-systemd.service... Apr 30 12:16:54.096402 vm-remotemounts8 systemd[1]: Mounting /mnt/4... Apr 30 12:16:54.126040 vm-remotemounts8 systemd[1]: Mounting /mnt/5... Apr 30 12:16:54.128793 vm-remotemounts8 systemd[1]: Mounting /mnt/9... Apr 30 12:16:54.157714 vm-remotemounts8 systemd[1]: Mounting /mnt/6... Apr 30 12:16:54.232126 vm-remotemounts8 systemd[1]: Starting NFS status monitor for NFSv2/3 locking.... Apr 30 12:16:54.346662 vm-remotemounts8 systemd[1]: Started NFS status monitor for NFSv2/3 locking.. ---> Proper timing (0.4 seconds above) Apr 30 12:16:54.576942 vm-remotemounts8 systemd[1]: Reloading. Apr 30 12:16:54.838234 vm-remotemounts8 systemd[1]: mnt-2.mount: Failed with result 'protocol'. Apr 30 12:16:54.838448 vm-remotemounts8 systemd[1]: Failed to mount /mnt/2. [...] -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- Actual results: Failure of some mount units (but mounts performed anyway) Expected results: No failure Additional info: In order to reproduce while stracing systemd, the service needs to be adjusted to execute just after rpc-statd.service finished: -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- [Unit] DefaultDependencies=no Conflicts=umount.target After=rpc-statd.service Requires=rpc-statd.service [Service] Type=oneshot ExecStart=/bin/sh -c '/bin/systemctl daemon-reload' [Install] WantedBy=multi-user.target -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- Stracing systemd early during boot using a generator (/usr/lib/systemd/system-generators/strace-systemd): -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- #!/bin/sh nohup timeout 3m strace -fttTvyy -s 1024 -o /run/systemd.strace.$(date +%s) -p 1 & -------- 8< ---------------- 8< ---------------- 8< ---------------- 8< -------- chmod +x /usr/lib/systemd/system-generators/strace-systemd

Release Notes

No. of Comments

Resolution

Won't Do