Symptoms

This article explains how to Enable/Disable Telnet/SSH in DELL OS10 switches. Prerequisite This article assumes the user has reach ability to the IP address of the switch. Telnet By default Telnet server is disabled in OS10 switches. Configuration Syntax Command Explanation OS10#configure terminal To enter into switch configuration mode OS10(config)# ip telnet server enable Enable Telnet server OS10(config)# no ip telnet server enable Disable Telnet Server SSH By default SSH server is enabled in OS10 switches. Configuration Syntax Command Explanation OS10#configure terminal To enter into switch configuration mode OS10(config)# ip ssh server enable Enable SSH server OS10(config)# no ip ssh server enable Disable SSH Server Sample Configuration 1> TelnetOS10# configure terminalOS10(config)# ip telnet server enable 2> SSHOS10# configure terminalOS10(config)# ip ssh server enable To verify if a user is logged in using ssh or telnet protocol use below command We can see the protocol inside square bracket OS10# show users Index Line User Role Application Idle Login-Time Location----- ------ ------------ ------- ------------- ----- -------------------------- ---------------------1 ttyS0 admin sysadmin clish 0s 2019-10-01 XXX:XX:XXX console2 pts/0 admin sysadmin clish 00:01 2019-10-01 XXX:XX:XXX 50.0.0.2 [telnet]3 pts/1 admin sysadmin bash 14.7s 2019-10-01 XXX:XX:XXX 50.0.0. [ssh]

Cause

This article explains how to Enable/Disable Telnet/SSH in DELL OS10 switches.

Resolution

By default Telnet server is disabled in OS10 switchesBy default SSH server is enabled in OS10 switches.

Support Cases