...
Table of Contents: IntroductionConnecting your System to the P2418HZm MonitorSet the Dell P2418HZm Camera, Speaker, and Microphone in Skype when you first Log inSet the Dell P2418HZm Camera, Speaker, and Microphone in Zoom when you first Log in Introduction The Dell P2418HZm is the latest Dell monitor that is configured for video conferencing. It contains a 2.12 Mega-Pixel webcam, two omni-directional microphones, and two 5W integrated speakers, in addition to the FullHD display. We will take you through the basic set-up for your monitor. You can find out further information about this monitor on the following link: Dell P2418HZm Documentation Page Back to Top
No cause associated.
Connecting your System to the P2418HZm Monitor There are three cables that are required for basic functionality of your P2418HNz monitor: The Monitor Power Cord.The USB 3.0 Upstream Cable.The Video Display Cable. (VGA, HDMI, or DisplayPort.) The USB 3.0 upstream cable is supplied with the monitor and connects to the squared upstream USB connector on the bottom of the monitor. For the best display output, we recommend using HDMI or DisplayPort for your Video connection. Note: USB 3.0 functionality requires a USB 3.0 capable computer. Note: The monitor’s USB interface works only when the monitor is On or in the power save mode. If you turn the monitor Off and then turn it straight back On, the attached peripherals may take a few seconds to resume normal functionality. Note: USB 2.0 and above is needed to support webcam video and audio functions. Slide the shutter on the front of the webcam to the left, to uncover the webcam. (Figure.1 Webcam Slide) Back to Top Set the Dell P2418HZm Camera, Speaker, and Microphone in Skype when you first Log in Steps to configure your monitor when using the Skype conferencing software: Skype will show the settings for the Camera, Speakers, and Microphone when you log in to Skype for the first time. Click the drop-down arrow to the right-hand side of Microphone and select P2418HZm. (Figure.2 Microphone Drop Down) Click the drop-down arrow to the right-hand side of Speakers and select DELL P2418HZm. Click Continue to go to the camera settings interface. (Figure.3 Speakers Drop Down) Click the drop-down arrow to the right-hand side of Camera and select Dell_Monitor_IR_Webcam, click Continue to finish setting up the webcam. (Figure.4 Camera Drop Down) The General Skype Settings InterfaceThe Settings in the Skype Video Call Interface The Skype Settings Interface: Click the three dots icon ··· and select Settings to get into the settings interface. (Figure.5 Skype Settings) Select Audio and Video and click the camera drop-down arrow to select Dell_Monitor_IR_Webcam. (Figure.6 Audio and Video) Click the microphone drop-down arrow to select P2418HZm. (Figure.7 Microphone Drop Down) Click the speakers drop down arrow to select DELL P2418HZm. Then finish the camera, speaker, and microphone settings. (Figure.8 Speakers Drop Down) Settings in the Skype Video Call Interface: Click the mic and camera icons to use the mic and camera in chatting. Click More and select Audio and video settings to begin configuring them. (Figure.9 In Call Screen) Click the camera drop-down arrow to select Dell_Monitor_IR_Webcam. (Figure.10 Audio and Video Settings) Click the microphone drop-down arrow to select P2418HZm. (Figure.11 Microphone Drop Down) Click the speakers drop down arrow to select DELL P2418HZm. Then finish the camera, speaker, and microphone configuration. (Figure.12 Speakers Drop Down) The function of the front panel buttons in Microsoft Skype for Business The Hook: The Hook button light flashes when someone calls you on Skype for Business. Press the Hook button to answer the incoming voice or video call. To end an active voice or video call, press the Hook button. Mute: To mute the audio, press the mute button. The mute button light turns on when the audio is muted. Volume Down/Volume Up: To adjust the volume, press the Volume Down or the Volume Up buttons. The Activated On-Screen Display (OSD) shows the numeric values of the volume level. Microphone Mute: The mute the microphone, press the Microphone mute button. The microphone mute button light turns on when the microphone is muted. Note: The front panel buttons, excluding Volume Up and Volume Down, function only when the Microsoft Skype for Business is active on your computer. Back to Top Set the Dell P2418HZm Camera, Speaker, and Microphone in Zoom when you first Log in Enter the settings interface: If you are invited to join a meeting, click the Test Computer Audio button before joining the meeting room, as shown in Figure.13. (Figure.13 Test Computer Audio) If you have logged in to your account, click the settings button, as shown in Figure.14. (Figure.14 Settings Cog) Select Video, click the drop-down box below the Camera to select Dell_Monitor_IR_Webcam. (Figure.15 Camera Settings) Select Audio, click the drop-down box below the Microphone to select P2418HZm. (Figure.16 Microphone Settings) Click the drop-down box below the Speaker to select DELL P2418HZm. Then finish the camera, speaker, and microphone configuration. (Figure.17 Speakers Settings) Back to Top