Launching soon: The world's first vendor agnostic bug scrubLearn more & join waitlist
OPERATIONAL DEFECT DATABASE
...
...
No DisplayPort Cable Error Dell U2713H and U2414H LCD display users may encounter an "No DisplayPort Cable" error message when setting up the display. Usually, the cause of the error is a failure to properly connect the cables between the display and a computer. The configuration of the On Screen Display (OSD) menu of the display can be another cause. Note: The Default cable that is packaged with Dell DisplayPort capable displays is the Mini-DisplayPort (mDP) to DisplayPort (DP) cable. If your system does not support a DisplayPort connection, you must purchase the appropriate cable for your system. This display has 4 signal input options. The cable configuration from the computer graphics adapter must match the cable input to the display. DisplayPort: (See Figure 1)Figure 1 Mini-DisplayPort (See Figure 2)Figure 2 HDMI (Two port allowing HDMI connections to 2 devices) (See Figure 3)Figure 3 DisplayPort is the most versatile connection type allowing both video and audio data transmission. It also allows for Multi-Stream Technology (MST) connections of 2 or more MST capable displays through one DisplayPort connection. Mini-DisplayPort has many of the same features of DisplayPort with a smaller connector. HDMI is the oldest of modern display connections, also allowing for Video and Audio data through the same cable. Many TVs and multimedia devices use HDMI connections. Systems or displays without these cable connections require specialized adapters to connect to these ports. Note: The Default video input selection is DisplayPort. If a Mini-DisplayPort or HDMI input is used, then the display input must be adjusted to match. If the On-Screen Display is configured for a different port than the active video signal, the main OSD screen will not display. To change the input on the display, press button (#3 in the figure below) and the input menu will appear. Use buttons #1 and #2 to highlight the correct input then press button #3 to select. (See Figure 4)Figure 4 Note: Displays that have more than 3 input options cannot be configured for "Autodefect" like less advanced displays. Due to this, the input port must be manually selected. Note: To access the main menu of the OSD, press any of the 4 buttons on the front of the display, this will display this small menu: (See Figure 5)Figure 5Pressing the third button from the left will bring up the main on-screen menu.
No DisplayPort Cable Error Dell U2713H and U2414H LCD display users may encounter an "No DisplayPort Cable" error message when setting up the display. Usually, the cause of the error is a failure to properly connect the cables between the display and a computer. The configuration of the OSD menu of the display is another cause. (See Figure 6)Figure 6 - No DisplayPort cable error. If the On-Screen Display is configured for a different port than the active video signal, the main OSD screen will not display. To change the input on the display, press the second button from the (#5) power button (#3 in the figure below) and the input menu will appear. Use buttons #1 and #2 to highlight the correct input then press button #3 to select. (See Figure 7)Figure 7 - Input Source Selection screen. Note: Displays that have more than 3 input options cannot be configured for "Autodefect" like less advanced displays. Due to this, the input port must be manually selected. No DisplayPort Cable Error Troubleshooting If you receive an "No DisplayPort Cable" error message when setting up the display. The first thing to check is the DisplayPort cable connection on the display. These displays have both Input and Output DisplayPort connections and the input connection "DP in" or "mini-DP in" is used to connect the display to the system. Bottom View U2713H (See Figure 8) DisplayPort inMini-DisplayPort inDisplayPort out Figure 8 Bottom View U2414H (See Figure 9) DisplayPort inMini-DisplayPort inDisplayPort out Figure 9 DisplayPort markings (See Figure 10) DisplayPort inMini-DisplayPort inDisplayPort out Figure 10 - Port Markings on display. If the cable connections are correct, then the next step is to adjust the OSD menu to ensure that the correct port is selected to receive the system's video signal. (See Figure 11.) Figure 11 - On-Screen Display Menu. If the display still does not receive a signal. Try moving the display to another system that works with a DisplayPort configured display and see if a different display works on the affected system. Use a DisplayPort Cable that you have tested on another working system too, to ensure that the original cable is not faulty. If you have further questions about this solution, please contact Dell Technical Support. REFERENCE Dell U2414H User's Guide Back to Top
Out of warranty? No problem. Browse to the Dell.com/support website and enter your Dell Service Tag and view our offers. NOTE: Offers are only available for US, Canada, UK, France, Germany, and China personal computer customers. Server and Storage not applicable.