Launching soon: The world's first vendor agnostic bug scrubLearn more & join waitlist
OPERATIONAL DEFECT DATABASE
...
...
Failure to upgrade FPGA version to standby RP module Example: 1. When you're trying to upgrade your fpga version 17071402 to 18102401 for stby-RP. 2. After the standby RP module reloaded as part of the upgrade process, the version shown under the enable cli command "show hw-programmable all" remains as 17071402 instead of changing to 18102401. ASR1006-1#upgrade hw-programmable fpga filename harddisk ASR1006-1#$lename harddisk:asr1000rpx86-hw-programmables.17.02.01.SPA.pkg R1 Start service Upgrade FPGA on Route-Processor 1 from current version 17071402 to 18102401 (Y)es/(N)o/(C)ontinue? [Y] Y Start service This command could take up to 15 minutes, please wait and do not power-cycle the chassis or the card. Otherwise, hardware may be unrecoverable. It is recommended that all cards are running the same version IOS-XE software prior to the upgrade. At the end of upgrade, rp/1 will be power-cycled. (Y)es/(N)o/(C)ontinue? [Y] Y Upgrade fpga hw-programmable on Route-Processor 1 Reloading Route-Processor 1 to start upgrade %%Reloading the standby RP %%Notifying other RP to reset itself %%Reset other RP: other RP does not need reset (0) ASR1006-1#sh hw-programmable all Hw-programmable versions Slot CPLD version FPGA version ---------------------------------------------------------------------- R0 14111801 17071402 R1 14111801 17071402 <-- remain same F0 1003190E 10072001 F1 1003190E 10072001 0 00200800 N/A 1 19041600 00010024 2 N/A N/A
1. This is a breakage in all 17.x throttle. 2. Fix is provided in 17.13 onward.
We will attempt to upgrade the FPGA of R0 (active) with the installer file located at the harddisk: and stby-harddisk. Then I will use a manual switchover into R1 (standby). ASR1006-1#upgrade hw-programmable fpga filename harddisk ASR1006-1#$lename harddisk:asr1000rpx86-hw-programmables.17.02.01.SPA.pkg R0 Start service Upgrade FPGA on Route-Processor 0 from current version 17071402 to 18102401 (Y)es/(N)o/(C)ontinue? [Y] Y Start service This command could take up to 15 minutes, please wait and do not power-cycle the chassis or the card. Otherwise, hardware may be unrecoverable. It is recommended that all cards are running the same version IOS-XE software prior to the upgrade. At the end of upgrade you will be asked to reload the chassis. (Y)es/(N)o/(C)ontinue? [Y] Y Upgrade fpga hw-programmable on Route-Processor 0 1756648+0 records in 1756648+0 records out 1756648 bytes (1.8 MB, 1.7 MiB) copied, 35.5878 s, 49.4 kB/s 1756648+0 records in 1756648+0 records out 1756648 bytes (1.8 MB, 1.7 MiB) copied, 4.29564 s, 409 kB/s The fpga has been successfully upgraded on Route-Processor/0. PLEASE RELOAD THE CHASSIS NOW. ASR1006-1# ASR1006-1# ASR1006-1#redundancy force-switch ASR1006-1#redundancy force-switchover Proceed with switchover to standby RP? [confirm] After switch-over: ASR1006-1#show hw-programmable all Hw-programmable versions Slot CPLD version FPGA version ---------------------------------------------------------------------- R0 14111801 18102401 <-- updated successfully R1 14111801 17071402 F0 1003190E 10072001 F1 1003190E 10072001 0 00200800 N/A 1 19041600 00010024 2 N/A N/A
update happens successfully but version is not updated in software.