Symptom
Support is needed for the Wireless related OIDs (currently supported on AireOS but not IOS-XE) listed below:
.1.3.6.1.4.1.9.9.618.1.8.4; clsSysApConnectCount; APs connected (or joined) to WLC
.1.3.6.1.4.1.9.9.618.1.8.12; clsMaxClientsCount; MAX value of clients on AP basis (r0 and r1)
.1.3.6.1.4.1.14179.1.1.5.1; agentCurrentCPUUtilization; WLC CPU Util%
.1.3.6.1.4.1.14179.1.1.5.2; agentTotalMemory; WLC Total Memory
.1.3.6.1.4.1.14179.1.1.5.3; agentFreeMemory; WLC Available Memory
.1.3.6.1.4.1.9.9.198888.0.1.12; cLHaPrimaryUnit; returns if active controller is the primary or secondary unit
.1.3.6.1.4.1.14179.2.2.1.1.3 bsnAPName Name of Current AP
.1.3.6.1.4.1.14179.2.2.2.1.12 bsnAPIfOperStatus; Interface status (radio) of AP
.1.3.6.1.4.1.14179.2.2.13.1.3 bsnAPIfLoadChannelUtilization Channel utilization per AP Radio per AP
.1.3.6.1.4.1.14179.2.2.2.1.15 bsnApIfNoOfUsers; Number of users on AP by AP and by AP Radio
Conditions
IOS-XE 9800 WLC
Workaround
Use the following MIB for alternatives to
1.3.6.1.4.1.14179.1.1.5.1; agentCurrentCPUUtilization; WLC CPU Util%
.1.3.6.1.4.1.14179.1.1.5.2; agentTotalMemory; WLC Total Memory
.1.3.6.1.4.1.14179.1.1.5.3; agentFreeMemory; WLC Available Memory
Polaris existing MIBs
1.3.6.1.4.1.9.9.109.1.1.1.1
1.3.6.1.4.1.9.9.48.1
1.3.6.1.4.1.9.2.1.9
1.3.6.1.4.1.9.9.221.1.1.1.1
1.3.6.1.4.1.9.9.715.1.1.6.1
Further Problem Description
Refer all the discssion attachment from different team for the solution
