Symptom
- Xconnect interface is flapping when shut/no shut the other side xconnect
- L2 pseudowire continues to fail due a failed device or event and cannot recover and will result in regular xconnect flapping.
Conditions
A failure of device in the topology or a shut/no shut is issued on the connected device on the other side.
Workaround
- shut/ no shut other side xconnect interface
- interface TenGigabitEthernet x/y/z
description ### X connect 1 ###
mtu 9216
no ip address
negotiation auto
no keepalive
service instance 10 ethernet
encapsulation default
l2protocol tunnel cdp stp vtp pagp dot1x lldp lacp udld loam esmc elmi ptppd mmrp mvrp
xconnect x.x.x.x 10 encapsulation mpls
no remote link failure notification ------------> configure this command.
Further Problem Description
