Symptom
Following document mentions that Maximum input volt-amperes is 760 A ( at 100 VAC ).
>>Cisco Nexus 9336C-FX2 NX-OS Mode Switch Hardware Installation Guide
>>https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/hw/n9336cfx2_hig/guide/b_n9336cFX2_nxos_hardware_installation_guide/b_n9336cFX2_nxos_hardware_installation_guide_appendix_0111.html#reference_55654F4E30D84D95AC02024FB7815E22
But, A is the unit of ampere.
So, There is a typo about that Unit.
Wrong : 760 A ( at 100 VAC ).
Correct : 760 VA ( at 100 VAC ).
And the same value is listed on 650-W AC Power Supply Specifications .
>>Maximum input volt-amperes 760 VA at 100 VAC
>>Maximum output power per power supply 650 W
>>https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/hw/aci_93180YCex_hig/guide/b_n93180ycex_aci_mode_hardware_install_guide/b_n93180ycex_aci_mode_hardware_install_guide_appendix_0111.html#id_19895
The value of the 1100W PSU was copied from the 650W value. It is not for me to determine that.
So, I would like you to tell me the correct value of Maximum AC input current and Maximum input volt-amperes of 1100W PSU.
