Symptom
noticed that the LO-PPLM alarm is mislabeled when asserted in the "show controller sdh" command. This is a minor defect.
Jul 15 17:31:39.240 UTC: %CONTROLLER-5-UPDOWN: Controller SDH 0/3/4 STM16.AU4/TUG3/VTG/VT1.5 1/1/1, changed state to down
Jul 15 17:31:48.245 UTC: %SDH-3-ALARM: SDH 0/3/4.1/1/1/1 VC12: LO_PPLM asserted
LITF-ASR903x02PKTDCS#term mon
Jul 15 17:31:56.238 UTC: %SDH-4-ALARM: SDH 0/3/4.1/1/1/1 VC12: LO_BER_SD_B3 /1 VC12
SDH 0/3/4 is up.
Path mode VC1x
AU-4 1, TUG-3 1, TUG-2 1, VC12 1 (SDH 0/3/4.1/1/1/1 VC12) is down
VT Receiver has LP-MIS. >>
cep is configured: FALSE cem_id (0)
fwd_alarm_ais :0 fwd_alarm_rai :0
Framing is crc4, Clock Source is Internal
BIP2-tca:6, BIP2-sf:3, BIP2-sd:6
Tx V5:1
Rx V5:2
Tx J2 Length=16
TX J2 Trace Buffer:
45 58 46 4F 20 53 4F 4E 45 54 2F 53 44 48 00 00 EXFO SONET/SDH..
Expected J2 Length=16
Expected J2 Trace Buffer:
45 58 46 4F 20 53 4F 4E 45 54 2F 53 44 48 00 00 EXFO SONET/SDH..
Rx J2 Length=16
RX J2 Trace Buffer:
CRC-7: 0xBA OK
LITF-ASR903x02PKTDCS# sho facility-al st | inc /1 VC12
SDH 0/3/4.1/1/1/1 VC12 Jul 15 2019 17:31:56 MAJOR LO_PPLM Lower Order Path Label Mismatch [40]
LITF-ASR903x02PKTDCS#
Jul 15 17:32:41.238 UTC: %SDH-3-ALARM: SDH 0/3/4.1/1/1/1 VC12: LO_PPLM cleared
Jul 15 17:32:41.238 UTC: %CONTROLLER-5-UPDOWN: Controller SDH 0/3/4 STM16.AU4/TUG3/VTG/VT1.5 1/1/1, changed state to up
Jul 15 17:32:41.238 UTC: %SDH-5-ALARM: SDH 0/3/4.1/1/1/1 E1: DS1_AIS cleared
Further Problem Description
This is NOT a cosmetic issue and has a detrimental impact on the customer's ability to troubleshoot should an issue occur.
