Symptom
In 7.1(4)N1(1), issuing command show interface status fex lists FC/VFC interfaces before the FEX HIF ports are listed
esc-6004-A# show interface status fex 161
--------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
--------------------------------------------------------------------------------
fc7/1 is trunking
Port description is **5548UP-118-fc1/32**
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 21:81:00:2a:6a:1c:9f:40
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port mode is TF
Port vsan is 100
Speed is 4 Gbps
Transmit B2B Credit is 16
Receive B2B Credit is 15
Receive data field Size is 2112
Beacon is turned off
Trunk vsans (admin allowed and active) (1,100)
Trunk vsans (up) (100)
Trunk vsans (isolated) ()
Trunk vsans (initializing) (1)
1 minute input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
1515 frames input, 93516 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
1523 frames output, 851768 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
2 output OLS, 2 LRR, 0 NOS, 0 loop inits
last clearing of "show interface" counters never
15 receive B2B credit remaining
16 transmit B2B credit remaining
0 low priority transmit B2B credit remaining
Interface last changed at Tue Sep 6 08:18:12 2016
Conditions
command show interface status fex is issued on switch which has FEX and also running FC/FCoE features
Workaround
Cosmetic display issue. Use command
