Symptom

example : ASR1006-1#sh pppoe session 1 session in LOCALLY_TERMINATED (PTA) State 1 session total Uniq ID PPPoE RemMAC Port VT VA State SID LocMAC VA-st Type 9 9 b414.8924.bc00 Po10.1550 2 Vi2.1 PTA f0f7.555b.fbc9 VLAN:1550/500 UP ASR1006-1# ASR1006-1#sh subscriber session uid 9 ASR1006-1# ====> emptu

Conditions

This condition is seen when LCP renegotiated but the PPPoE session in not teared down.

Workaround

Use the username as key instead of the UID ============================ example : take pppoe session vi number ----------------------------- F340.23.23-ASR1006-1#sh pppoe session 1 session in LOCALLY_TERMINATED (PTA) State 1 session total Uniq ID PPPoE RemMAC Port VT VA State SID LocMAC VA-st Type 9 9 b414.8924.bc00 Po10.1550 2 Vi2.1 PTA f0f7.555b.fbc9 VLAN:1550/500 UP Use vi number to recover the username ------------------------------------- ASR1006-1#sh ppp all | in Vi2.1|Stage Interface/ID OPEN+ Nego* Fail- Stage Peer Address Peer Name Vi2.1 LCP+ CHAP+ IPCP+ LocalT 10.1.1.1 PPPUSER ASR1006-1# or ASR1006-1#sh subscriber session br | inc State|Vi2.1 Uniq ID Interface State Up-time Identifier 9 Vi2.1 authen 00:15:38 PPPUSER Use username to retrieve the subscriber info --------------------------------------------- ASR1006-1#sh subscriber session username PPPUSER Type: PPPoE, UID: 9, State: authen, Identity: DSL IPv4 Address: 10.1.1.1 Session Up-time: 00:14:35, Last Changed: 00:14:35 Interface: Virtual-Access2.1 Switch-ID: 8263 Policy information: Authentication status: authen Classifiers: Class-id Dir Packets Bytes Pri. Definition 0 In 38 1412 0 Match Any 1 Out 24 1216 0 Match Any Features: QoS Policy Map: Class-id Dir Policy Name Source 0 In MYPOL-UP Virtual-Template2 1 Out MYPOL-DOWN Virtual-Template2 Configuration Sources: Type Active Time AAA Service ID Name USR 00:14:35 - Peruser INT 00:14:35 - Virtual-Template2 ASR1006-1#

Further Problem Description