Symptom
IPSG entries are not getting pushed to F2E card while for other line card F3 it is working fine
Hardware programming on F2E:
====================
N2-ACCESS# sh forwarding security mac module 1 vrf all
IPv4 security information for table 0x5, prefix count 15
------------------+------------------------+-----------
Prefix | Mac-address M V P | Interface
------------------+------------------------+-----------
IPv4 security information for table 0xfffe, prefix count 3
------------------+------------------------+-----------
Prefix | Mac-address M V P | Interface
------------------+------------------------+-----------
N2-ACCESS#
Hardware programming on F3:
===================
N2-ACCESS(config)# sh forwarding security mac module 8 vrf all
IPv4 security information for table 0x5, prefix count 17
------------------+------------------------+-----------
Prefix | Mac-address M V P | Interface
------------------+------------------------+-----------
30.0.0.10/32 0022.19a7.5567 1 0 1 Eth1/25
30.1.0.10/32 0000.0000.0001 1 0 1 Eth1/1
Conditions
Mixed VDC with F2E and F3 LC's
Workaround
Not Known at this moment of Time
