Symptom
This syslog message is observed and the MPA goes into a FAILURE state:
pfm_node_lc[288]: %PLATFORM-FCA-2-SEQ_ERROR : Clear|lda_server[40990]|EP Controller(0x1047000)|Device driver for device 'ROGUE 10G EP FPGA' detected sequence error on 'ROGUE I2C SILAB Bus'. Error status 0xfeedface. Error address 0xfeedface. Error data 0xfeedface.
Further Problem Description
MPA goes to disable or failed state after I2C timeout or Ack error, this was corrected by enabling the correct timeout interrupt.
