General

Symptom: In ACT,the Location for the Sab(Bay-1) and Wolverine(Bay-0) both show the same location i.e 0/0/CPU. Conditions: I have an ironman cluster setup.When i launch the ACT tool and go Under FP devices ,the Location for the Sab(Bay-1) and Wolverine(Bay-0) both show the same location i.e 0/0/CPU.But the cli command sh hw-module fpd location all clearly shows which EP is in which bay. Expected result:The Location for EP in rack 0 bay 0 should show as 0/0/0 and the one in bay 1 should show as 0/0/1. Workaround :The information missing in FP fevices can be viewed by issuing the cli command sh hw-module fpd location all . Recovery :This field is not applicable here. Workaround: Further Problem Description: